"Cycclone Magnetic Engines (CME) is the empirical application of a new era in power producing products. Recent developments in the manufacture of magnets has opened this exciting new arena for technological advancement.

CME is the concept of using permanent magnets in a configuration that supplies mechanical power on demand. To offer an alternative to the ubiquitous internal combustion engine that is commercially viable, the technology must imitate the manner and principles that the internal combustion engines operate under. CME believes that it is able to meet this criteria by concentrating development on the control and configuration of the applied magnets. The shape and composition of the magnets is the technical heart of the concept and one of our most guarded secrets.

Practically all of the research and development work carried out in the race to create a power source utilizing the attraction and repulsion of magnets has been derived from linear motion.Cycclone magnetic engines combine cyclic motion with the use of spinning metals that clone the magnetic pole, hence the name cyc-clone." more

"Introducing the most exciting energy innovation on the planet since the introduction of electricity. What have we got here? We now have the ability to Amplify Electricity, 1 Kilowatt can now become 4.25 Kilowatts or multiples thereof via the Evergreen Electricity Amplifier. Now YOU too can be part of, and even profit from your involvement. To learn HOW YOU CAN PARTICIPATE Please read the following informations: more.

There are many uses for the technology:- It can provide more highly efficient, environmentally clean and cost effective electricity than any other known method to date. Other applications are water desalination, hydrogen production or as a highly efficient motor for plant, pumps and machinery. It can also be a more efficient and cost effective drive for anything that turns, spins or rotates. " more ( Lutec Australia site )

"Professor John Searl is the founder of Searl Effect technology and inventor of the Searl Effect Generator (SEG). In a World suffering massive and constant environmental damage, from the destruction of our precious rainforests to an emerging energy crisis of catastrophic proportions, John Searl has found a solution, the John Searl Solution. Clean, sustainable and limitless energy. John welcomes you to his only official website, the Searl Solution, and is honoured to introduce his technology and deliver to you his vision. "

"The Searl Effect Generator (SEG) is a self-contained, electrical power generator, able to produce clean and sustainable energy. It is a magnetic prime mover that operates with no friction, and can supply electrical power to suit both home and industry. " more (other John Searl Web sites: www.searleffect.com - www.swallowcommand.com - www.johnsearlstory.com - SISRC Ltd )

"We are beginning to accept requests and to draw up contracts on NEW POWER STATIONS WORKING WITHOUT FUEL CONSUMPTION. At first stage of production we are planning ro manufacture power stations with the power from 50 kW to several MW. In 2007 we are planning to produce power stations with the power from 10 kW to several GW.

The power station is absolutely safe for human health and ecology. It can operate under any climatic conditions. It is possible to install the power station in cars, sea crafts, submarines and planes. It can be used for space flights. It can operate in vacuum and under conditions where usual power stations are not able to operate. We have working power station on 10 kW."

"This remarkable patented technology has many possible applications. It can amplify all existing or new electricity stations production. This is done by simply adding the technology to the existing or new power stations distribution sub stations. It can therefore be applied to and amplify any size power station regardless of the type of fuel being used. It will be equally effective with coal, oil, gas, and solar, wind, and diesel, nuclear or hydro power stations.

The LEA technology can be just as effective in other applications. The input power can be supplied to a LEA system from a normal wall plug outlet, or from other types of generator or battery supply. The input causes synergistic internal events in the patented LEA motor/generator/amplifier system to increase the amount of electricity it receives at no further cost. (See the How It Works page)"

"Perendev Power International Holdings (PPIH) is becoming increasingly recognised internationally for its alternative energy products and new technology. It is poised to launch the first commercially viable magnetic motor as an alternate energy source. Energy that removes reliance from the national grid and oil. This uninterrupted power does not pollute but actually cleans up the environment.
PPI's motors can drastically reduce the average homeowner’s electricity bills. Once paid for there will be no more electric bills. We will be safeguarded against terrorism threats to our electricity and oil supplies and a disrupted lifestyle.
The Perendev magnetic motor brings a new form of energy to the World, No fossil fuel is used in the running of the motor, the motor runs on Magnetic energy produced by the repulsion of the magnetic fields."

" Since its inception the Steorn team has been focused on delivering complex technologies in innovative ways. This approach has seen Steorn working at the cutting edge of many progressive industries.

Orbo produces free, clean and constant energy - that is our claim. By free we mean that the energy produced is done so without recourse to external source. By clean we mean that during operation the technology produces no emissions. By constant we mean that with the exception of mechanical failure the technology will continue to operate indefinitely.
The sum of these claims for our Orbo technology is a violation of the principle of conservation of energy, perhaps the most fundamental of scientific principles. The principle of the conservation of energy states that energy can neither be created or destroyed, it can only change form.
Because of the revolutionary nature of our claim, not only to the world of science but to the world in general, Steorn issued a challenge to the scientific community in August 2006 to test our technology and report their findings. The process of validation that has resulted from this challenge is currently underway, with results expected by the end of 2007. "

"The self-reliant EBM plant uses its own self-generated electromagnetic fuel. The research and development work of this hi-tech technology began in 1980 in four laboratories in Toronto, Houston, London and in Budapest, managed for ELECTRO ERG LIMITED (EEL) by the GAMMA Group, under Professor L. I. Szabó's leadership.

This technology is non-nuclear, 100 % environment friendly with zero emissions.

The average 1 kilowatt-hour electric power costs 75 % to 80 % of most local tariff rates at 65 % load factor (appx. 5,700 hours use per annum); The pay-back period of invested capital is less than 4 years! " more

- Travel ticket - Security Informations - Medical -